Skip to content
How to choose your ring size
Here are a few ways to measure your finger and determine your ring size. These are both professional and home methods.
Here are several popular methods for measuring a ring size to accurately determine the right fit:
1. Measuring the Finger Using a Ring Sizer
Description: Special ring sizers (typically available at jewelers) are precise tools that allow you to measure the circumference or diameter of a finger. The sizer may come in the form of a metal rod with rings of different sizes or plastic measuring bands that can be adjusted around the finger.
How to Do It:
- Place your finger through the rings on the sizer and find the size that fits most comfortably.
- Ensure that the sizer is neither too tight nor too loose – the ring should pass over the knuckle comfortably but not slip off.
- Note the correct size (e.g., 10, 12, etc.).
Advantages: This is the most accurate method, especially when performed by a professional who can provide advice if the size is unclear.
2. Using String or Thread
Description: By using a piece of string, ribbon, or thin tape, you can measure the circumference of your finger and then compare the result with a ring size chart.
How to Do It:
- Wrap the string or ribbon around the base of your finger.
- Mark the point where the ends meet.
- Unwrap the string and measure the length from the end to the marked point with a ruler.
- Use a ring size chart to find the size that matches the measured circumference.
Advantages: Simple, affordable, and convenient for home use.
Disadvantages: May be less accurate than a jeweler’s sizer, especially if the string is flexible or if the mark is placed incorrectly.
3. Using a Mobile App for Ring Measurement (Ring Sizer – Ring Fing)
Description: There are apps available that help measure ring size using a smartphone camera. These can either scan the finger or allow you to compare an existing ring with a screen template.
How to Do It:
- Download a jewelry app that offers ring measurement tools.
- Follow the app instructions to scan your finger or place your ring on the template shown on the screen.
- The app will indicate the ring size based on the scan or template comparison.
Advantages: Convenient and easy-to-use at-home method.
Disadvantages: Apps may vary in accuracy and often require screen calibration, which can affect results.
4. Measuring with a Caliper
Description: A caliper is a precise tool that can be used to measure the inner diameter of a ring. It’s especially useful when you have a ring that already fits and would like to match its size.
How to Do It:
- Take a caliper and place the measuring ends on the inner edges of the ring.
- Slowly close the caliper until it lightly touches the inner edges without pressing.
- Read the measurement on the caliper scale (in mm), which gives you the inner diameter of the ring.
- Compare the measured diameter to a ring size chart to find the correct size.
Advantages: A very accurate method, especially for those familiar with using a caliper.
Disadvantages: Requires an existing ring and precision; the caliper is a specialized tool and may not be readily available at home.
5. Using a Tapered Ring Mandrel
Description: A tapered ring mandrel is a specialized jeweler’s tool shaped like a cone, with ring sizes marked on it. You can slide the ring onto the mandrel to see where it stops, indicating the ring size.
How to Do It:
- Slide the ring onto the mandrel from the narrow end, moving it down until it fits securely.
- Read the size indicated on the mandrel where the ring has stopped.
- Record the size, or ask a jeweler to confirm it if unsure.
Advantages: Very convenient and easy-to-use tool for jewelers, offering a quick and precise measurement.
Disadvantages: This is a specialized tool, so it may not be readily available at home and requires an existing ring to measure.
Adding these two methods allows for even more precise ring sizing, especially if you have access to specialized tools.
